Fluke-101 Digital Multimeter Klein 130mm 160gr AC DC Voltmeter 600V 10A Frequenz

Beschreibung

FLUKE-101 Digital Multimeter
Neues Taschen-Digitalmultimeter Fluke 101 Basic, klein, nur 160gr leicht und nach Militärstandart MIL-PRF-28800F gebaut
Widerstand / Ohmmeter bis 40 MOhm, Spannung / Voltmeter bis 600V AC+DC, Strom/Ampermeter/ Kondensatormesser bis 10A, Power-Off-Funktion, Frequenz: bis 100.0 kHz
–
This is digital multimeter from Fluke. Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.
–
Features:
–
Basic dc accuracy 0.5%
CAT III 600 V safety rated
Diode and continuity test with buzzer
Small lightweight design for one-handed use
Rugged, durable design
Automatic shutdown
Battery is easy to replace
–
General Specification:
–
CAT Rating: CAT III 600 V
V AC Range: 600.0 V
V DC Range: 600.0 V
Ohms Range: 40.00 M?
Auto Shutoff: Y
Continuity: Y
Capacitor: 100.0 µF
Frequency: 100.0 kHz
Hold: No
Duty Cycle: Yes
Size: 130 mm x 65 mm x 27mm
Weight: 160 g
Battery: 2x AAA
–
Environmental Specifications
Operating Temperature: 0 °C to +40 °C
Storage Temperature: -30 °C to +60 °C
Operating Humidity: Non condensing (<10 °C)
<=90% RH (at 10 °C to 30 °C)
<=75% RH (at 30 °C to 40 °C)
(Without Condensation)
Operating Humidity, 40 M? 80% RH 10 °C to 30 °C, 70% RH 30 °C to 40 °C
Operating Altitude: 2,000 meters
Storage Altitude: 12,000 meters
IP Rating IP 40 per IEC 60529
Vibration Requirements: MIL-PRF-28800F, Class 2
Drop Test Requirements: -10°C and 1 meter to surface, per IEC-61010-1, and Fluke SOP 39.1 for portable Hand-held equipment
Shipping container drop per Fluke SOP 39.
EMI, RFI, EMC: Must meet all applicable requirements in
IEC/EN 61326-1
Absorption/Corrosion: Per Fluke SOP 39.1
Temperature Coefficients: Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 ºC